How to Manually Add Exercise to Apple Watch

So you've got a fancy new Apple Watch – congratulations. Now prepare to supercharge your experience with our list of essential Apple Watch features, tips, tricks and hacks.

The huge set of features has grown once again. But most people barely scratch the surface of what the Apple Watch can do.

That's why we've rounded up 67 essential hacks to help make the Apple Watch even more useful.

• Apple Watch Series 7 vs Series 6

And we keep the list up to date, to include improvements introduced through the most recent updates.

Update: This article was updated in November 2021 to include changes in watchOS 8.

• Discover: The best Apple Watch apps to download
• Read: The best Apple Watch faces
• Update: watchOS 8: all the new features

What does the Apple Watch do?

• Notifications on the wrist and read messages
• Fitness tracking (calories, exercise minutes, standing)
• Workout tracking
• Heart rate monitoring
• Warn about abnormal heart rates and detect falls
• ECG readings (Series 4/5/6 only) and blood oxygen tracking (Series 6 only)
• GPS tracking of workouts
• Make calls and receive messages (LTE versions with data plan enable this without iPhone)
• Turn-by-turn navigation
• Siri commands – alarms, timers, reminders
• Display tickets and boarding passes
• Tell the time

Create Portrait watch faces (watchOS 8)

Apple has said that the Photos watch faces is one of the most popular on the Apple Watch. We've explained in detail how to use a picture as an Apple Watch face.

If you just want to know how to create the Portrait watch faces and you own an iPhone 7 Plus or later capable of taking portrait photos and an Apple Watch Series 4, 5, 6, 7 or SE, you need to do the following:

1. Go to the Watch app on your iPhone and tap on the Face Gallery

2. Scroll down to Portraits. Choose the photos you want to use to turn into a watch face

3. Select from Classic, Modern or rounded face looks and then choose your complication layout

4. When you're done customising, hit the Add button and you have your Portrait watch face.

Turn on auto pause for cycling workouts (watchOS 8)

When Apple unveiled watchOS 8 and its new latest Watch, it revealed it wanted to bolster the features available for cyclists. That included a new fall detection mode for when you get on (and fall off) your bike. It also introduced the ability to turn on auto pause like you can do when you're tracking outdoor runs.

To turn on auto pause for cycling:

1. Go to Settings on your Apple Watch

2. Scroll down until you find the Workout app

3. From here you'll find the option to turn on auto pause.

Set multiple Watch timers (watchOS 8)

Sometimes, it's the simplest features that make the biggest difference when using Apple's Watch day-to-day. That's definitely how we see Apple's decision to finally make it possible to set up multiple timers on its smartwatch. To find the place to do that:

1. Press the Digital Crown to open up the app screen

2. Select Timers and scroll up and down to see a set of different popular timers you can pick from

3. Tap Custom if you need to make your own.

Stay focused (watchOS 8)

The new Focus mode is all about filtering out the distractions that are getting away of your productivity or even making sure you get an uninterrupted sleep. The idea is that you can set up Focus profiles to make sure your Watch recognises the times when you need to focus. To turn on a Focus profile:

1. On your Apple Watch, press the Digital Crown to enter the app screen and tap Settings

2. Scroll to find the Focus app where you'll be able to set up do not disturb and sleep profiles

3. You can also choose to mirror the Focus profiles you've set up on your iPhone.

Share photos (watchOS 8)

A large share of the new features introduced with watchOS 8 were geared to improving how the Watch handles photos and what you can do with them. It revamped the Photos app to make it easier to view images and it also made it much easier to share photos. To share a photo from the Photos app on your Apple Watch, you need to do the following:

1. Open the Photos app on your Apple Watch

2. Scroll to find the photo you want to share and tap to select

3. You will now see a small share button in the bottom right hand corner of the screen

4. You'll now see the option of where you can share that image. That might be through Apple's Message app, but you can also share via Apple's email client too.

Unlock your iPhone while wearing a mask (watchOS 7.4)

In watchOS 7.4 the Apple Watch can now unlock your iPhone when you're wearing a mask. The feature enables you to bypass the Face ID and passcode on your iPhone (only when wearing a face mask) as long as your Apple Watch is unlocked on your wrist. However, it won't be enabled automatically – do that:

1. On your iPhone head to Settings

2. Tap Face ID and Passcode

3. Turn on Unlock With Apple Watch

4. Accept warning.

Track sleep with Apple Watch (watchOS 7)

With the release of watchOS 7, the Apple Watch added the ability to natively track sleep. You need to setup Bedtime mode, which will put your iPhone and Apple Watch into a wind down mode before bed, and stop you being disturbed by notifications in the night.

Apple Watch sleep tracking isn't as detailed as you might be used to, and will track time asleep and the consistency of your bed time which are two hugely important factors for getting good rest. However, it doesn't monitor stages or rate the quality of your sleep.

You can read our full guide to Apple Watch sleep tracking. If you want that data then you'll need to download a third party app. We've tested and lived with most of the best Apple Watch sleep trackers, and found Autosleep and Pillow to be the best options.

Wash your hands properly (watchOS 7)

In this crazy post-pandemic world you'll be glad to know the Apple Watch will help you make sure you're washing your hands for long enough.

When you start running the tap and rinsing your hands, a timer will start with a nice bubbly decal. It will count down from 20 seconds to make sure you're washing any nasties away.

You can also turn on hand washing reminders in Settings > General > Handwashing.

Check your VO2 Max (watchOS 7)

A new addition in watchOS 7 was VO2 Max. This is now tracked in the Fitness app (renamed from Activity).

As part of your stats you'll find your Cardio Fitness score, which is a VO2 Max estimate based on your heart rate and pace on GPS tracked outdoor runs.

VO2 Max is a distilled single score on your fitness, and there's no greater gauge of your current level. The Apple Watch will also produce a warning if your VO2 Max starts dropping, as a little kick to get your sneakers on and get out for a run.

Get Cardio Fitness alerts (watchOS 7)

watchOS 7 brought VO2 Max to the Fitness app for the first time, but Apple has expanded that capability. VO2 Max is the true measure of fitness and refers to the body's ability to transfer oxygen to the blood – but has been a metric for hardcore athletes.

Cardio Fitness score on Apple Watch brings the idea of VO2 Max to the masses, and can estimate it based from your daily lifestyle – and warn you if it deems your fitness to be dangerously low.

It's an opt-in feature and Apple needs some information to start estimating Cardio Fitness. Head to the Apple Health app on iPhone and go to Summary > Cardio Fitness > Set up.

Share watch faces (watchOS 7)

watchOS 7 heralded a slew of new watch faces, but you can now also share your favorites with friends and family.

Just press and hold on a watch face (as if to change it) and you'll see a share button. You can add a contact and even dictate a message.

Sharing a watch face isn't just about the custom picture you've used. It can also mean the exact selection of complications and adjustments, that makes Apple Watch faces so personal and unique.

Use the App Dock (and customize it too)

Apple ditched glances way back in watchOS 3, and now you view all currently open apps by touching that side button.

You should totally use this dock, stacking it with your most used apps. Why? Because these are the apps your Watch will prioritize when pulling in information and background refreshes.

You can customize the dock in your companion Watch app. It can be set to pull in the most recent apps you used, which works a little bit like multitasking on the iPhone.

Or you could turn it into a proper dock with your favorite apps. If you choose the latter, you can easily customize which apps appear.

If you'd like to customize the dock on the Watch itself, you can do so by clicking the side button, then 3D touching an app and tapping "Keep in Dock." Or swipe left and press the red X to remove the app.

Unlock your Mac from your Watch

If you're fully kitted out with all the Apple gear, there's also a way that you can use your Apple Watch to skip typing in a password on your Mac to get access, so long as you have a mid-2013 or a newer Mac that's running macOS Sierra 10.12 or later.

If you want to pair the two together, the first thing you need to do is make sure that they're both signed into the same iCloud account.

Your next step is to head to your Mac and choose System Preferences, then Security & Privacy and click the General tab. Here, you'll be able to set the Apple Watch to unlock your Mac.

Make sure two-factor authentication is enabled as well on your Mac (head to System Preferences > iCloud > Account Details > Security).

Check out our full guide on unlocking the Mac with Apple Watch.

Use Bedside mode

Your Apple Watch can double as a neat little bedside clock, which makes it useful even when you're not wearing it.

Of course, the Apple Watch can now track sleep, but if you opt to keep it on charge at night rather than on the wrist, then turn it on its side to enable Bedside Mode.

If you really enjoy Bedside Mode you can even buy an Apple Watch charging stand to make it even easier and neater.

Update to the latest software

In order to make sure you're getting the most out of your Apple Watch, you're going to want to update it regularly. This is fairly straightforward to achieve, and you should get a pop-up on your iOS device each time there's an update ready.

To check on iOS, head to the My Watch tab in the Watch app, tap through to General and then go to Software update. Follow the instructions and and, voila, you should be on your way. Just make sure to keep the Apple Watch on charge throughout.

Also, considering there are different ways to force one, and you may need some troubleshooting tips, check out our full guide on how to update Apple Watch.

Listen to music on your Apple Watch

Apple Music streaming now comes directly to your Apple Watch thanks to cellular support, but you can still add MP3s and pair it with some AirPods for music. You'll need to head over to the companion Watch app, then over to the Music section.

Here, you'll see a few options. You can have a couple of ever-updating playlists automatically sync music to your Watch when it's charging.

You can also manually add in songs by artist, album and playlist just below that. Thankfully, Apple has made this process much, much easier than before. Previously, you had to create a playlist first before syncing over any music.

Of course, you should get a good pair of Bluetooth headphones to listen to the music. In fact, when you start playing a song on your Watch and there are no Bluetooth headphone connected it'll throw up a little pop-up box asking you to sync some headphones.

There's also the Apple Watch Spotify app, too, in case you're wondering what to do if you're not an Apple Music subscriber. You'll be able to add and play music to your Spotify library from within the app.

Clear all notifications

If you're overburdened by notifications, you can wipe your recent history by swiping down from the top of your screen to access a chronological list.

Once displayed, you can banish them all by long-pressing the screen then tapping Clear All.

If you're looking to manage your notifications and need more detailed help, check out our full guide on how to clear all notifications, which also includes tips on deleting texts and turning them off altogether.

Set an alarm

Setting an alarm on the Apple Watch isn't actually as straightforward as it may seem – sure, going into the Alarms app on the watch itself and twiddling around with the Digital Crown is easy enough, but there's plenty to delve into.

For details on how to set an alarm on the Apple Watch and keep it silent, or even set up Nightstand Mode, read our full guide.

Timers, on the other hand, are actually very straightforward. No matter what event you're clocking, simply heading into the Timers app and toggling how much time you want to track is about all there is to it.

Use Siri on your Apple Watch

Apple made several improvements to Siri back in watchOS 5, and most of them are in the Siri watch face.

Through machine learning, Siri is now be able to serve up more contextual information, such as showing heart rate after a workout, or sports scores if your favourite team is playing.

However, waking Siri and chatting with the assistant has also improved.

No longer do you activate things through "Hey Siri" – you simply need to enable the new wrist-raise option which automatically kickstarts the assistant. If that's a bit too Dick Tracy for you, pushing and holding the crown will also make Siri pipe up.

Read our full guide on things to ask Siri on your Apple Watch.

How to turn off Siri on your Apple Watch

If you don't find Siri all that useful, you can turn it off from your Apple Watch. To do it, go to the Settings on your Watch and then go to General. Go to the Siri option and then tap the toggle next to Hey, Siri to turn it off.

Take a screenshot

All Apple Watch devices can take screenshots when you push the Digital Crown and the action button below it at the same time. Images are then saved to the camera roll on your iPhone.

This is not set as default, though. To enable screenshots, head to the Watch companion app and then go to General. There, you'll be able to toggle Enable Screenshots on or off.

Take an ECG reading

One of the big new features introduced through the Series 4 was the ability to take an electrocardiogram (ECG).

It's an important feature that can help detect if you've got atrial fibrillation, so it's worth checking out at least once. It can even be helpful to take before you head for a yearly checkup.

Discreetly view the time

If you want to check in on the time without raising your wrist, you can slowly twist the digital crown upwards and it'll brighten up the screen gradually to let you peek in, rather than fully illuminating the watch screen.

Unpair your Apple Watch

Maybe you get a new iPhone or you decide to give your old Apple Watch to someone else because you've upgraded. You'll need to go through this process, which thankfully is pretty straightforward.

You'll need to go to the iPhone connected to your Watch. Head to the Watch app and open the My Watch tab, tap the 'I' on the screen and then hit Unpair Apple Watch.

You can also erase your data (if you want) by heading to Settings > General > Reset > Erase All Content and Settings on the device itself.

See the app you're using

This tip came from complaining to golf app developer Hole19 about constantly having to reopen the app while out on the course. Didn't we feel like fools.

In the Apple Watch settings menu, turn on the Wrist Raise feature. Below, you'll have a couple of options under 'On Screen Raise Show Last App'.

You can choose to show the last app while you're in session, within two minutes of last use, within one hour of last use, or always. Now, when you raise your wrist you'll see the last app you were using.

You can also do it from within the Apple Watch app on your iPhone. Just go to General and then Wake Screen, and you'll have the same couple of options to choose from.

Swap and change bands

One of the things Apple really pushes with the Apple Watch is bands. There are new bands released every few months, with new colors to match the season, and your wardrobe.

That's why we recommend having a look at what's out there and taking advantage of the customization options.

Read this: The best third-party Apple Watch bands

And if you don't want to splash the cash on Apple's bands, there are always third-party options. Despite new case sizes with the Apple Watch Series 4 and later models, your old bands will still fit, too – a handy design trick from Apple.

Struggling to swap them? Check out our how to change Apple Watch bands quick guide.

Use Running Auto Pause

As with many third-party apps, Apple also lets you halt run tracking when you get interrupted or have to stop at a set of traffic lights.

You can now enable automatic run pausing simply by heading to the Apple Watch app on your iPhone, heading to the My Watch section and then selecting Workout. Here, you'll be able to toggle on Running Auto Pause.

Unlock Watch from your iPhone

If you didn't do this in the initial setup process, you can still unlock your Apple Watch and iPhone at the same time without having to hammer in a passcode (if you've set one of those up).

To do this, go to the Watch companion app, where you can toggle the Unlock with iPhone feature on or off. You need to be wearing the Watch for this feature to work, though.

Use old Apple Watch as a kids tracker

A new feature of watchOS 7 was the ability to add a second Apple Watch to your Apple ID and use it as a kids watch. This will let you check in on your child's location, enable them to make calls to selected contacts and enjoy some fitness tracking data too.

You need an LTE Apple Watch (Series 3 onwards) and have it erased ready to pair – and choose Tap Set Up for a Family Member during the process. It needs a data plan (doesn't have to be the same as yours) and the person you're setting it up for named in your Family Group.

Measure your blood oxygen

If you're the owner of an Apple Watch Series 6 or Series 7, you can take advantage of its SpO2 sensor to check your blood oxygen levels. Open the Blood Oxygen app on the Series 6 or 7 and follow the instructions to take a spot check. Supported watches will also take automatic readings, which you can see recorded in Apple Health.

Don't miss an alert with Prominent Haptic

If you want to make sure you don't miss a notification without alerting everyone in your vicinity with an aggressive 'ding' then you can set a Prominent Haptic. This essentially pre-warms you of an alert with a gentle haptic tap, before the standard alert comes through. You can set this up by going to Settings > Sounds and Haptics and choosing Prominent Haptic on the watch.

Turn on heart rate notifications

Apple is taking heart health more seriously, and one of the newer features is a notification when your heart rate is detected as lower or higher than it should be. You can enable it in the heart rate section of the companion app.

When you turn it on, you'll be asked to choose a threshold. Then, your Apple Watch will only alert you when you go past the threshold and appear to have been inactive for about 10 minutes.

Read this : Apple Watch heart rate monitor essential guide

On top of that, it'll look for signs that your elevated/falling heart rate is a longer-term problem, rather than a temporary blip brought on by something terrifying – like a horror movie.

Use the Breathe app

If you find yourself getting stressed in the day, you may find it useful to tap into the Apple Watch Breathe app. This allows you to follow the on-screen instructions and focus on your breathing for a select amount of minutes.

It's a handy wellness feature from Apple, and you can edit details such as how many breaths per minute you want to take, how many notifications you receive and how prominent the haptic feedback is through the Watch app on your iPhone.

Chain together your workouts

You triathlete, you. To date the Apple Watch has let you down, but it's gotten better, and you can now chain together workouts, which means less time rubbing those sweaty fingers around the screen.

If you want to jump from one type of workout to another, rather than stopping the current one, swipe right and tap the + button to add a new one on.

Share Activity rings

Apple's answer to Fitbit, Garmin and the rest of the fitness tracker fraternity is its Activity platform. That's where all of your daily movements are recorded. In its latest iteration you can now share activity progress with other Apple Watch users.

To do it, you need to add friends, which has to be done by going to the dedicated Activity app on your iPhone. You can then select Sharing and hit the + icon in the corner to add contacts.

Jog on: The best Apple Watch running apps

Back on the Apple Watch, go to the Activity app and swipe right to see Activity data from your friends. You can also comment on workouts to keep them motivated, or to make fun of them. Either way, it's your call.

Change the move goal

The move goal is your calorie benchmark for each day, and, while it's a satisfying one to tackle, that battle gets a little old if it's set too high or too low.

Every so often, the Watch will nudge you to let you know how you're getting on, but did you know you can alter the number directly from the watch?

Simply go to the Activity app and Force Touch the rings - you should see the move goal pop up and allow you to adjust. This is really handy for when you want to steadily ramp up your targets.

Use pictures as watch faces

By default, the Apple Watch selects images from the Favorites folder on your iPhone – something we'd never thought to use before.

So go and tag some images in iOS using the heart button at the bottom. When you use the photo album watch face it will randomly select photos from the folder. You can tap the face to cycle through images.

Essential reading : Best Apple Watch faces to try out

Alternatively, you can now turn those photos into trippy designs with the kaleidoscope face.

On your iPhone, you should now now see a 'Create Watch Face' option in the action menu on any picture. This will let you stick a picture on your Watch either as is, or in kaleidoscope form.

Control music playback

We've already talked about how to add music to the Apple Watch, but what about controlling it on other devices? Well, if you've updated past watchOS 4.3, you can control the music playback on the Apple HomePod or iPhone straight from the Watch.

Of course, iPhone users could briefly do this after watchOS 4 first launched, though it was swiftly removed after music streaming was re-added to the smartwatch through watchOS 4.1.

With many users enjoying the control, though, and the HomePod entering more homes, users are now one again able to select tunes, alter volume and skip tracks all from the wrist.

Change AirPods volume

If you want to change the volume on the AirPods without taking out your iPhone, you have to ask Siri. Convoluted to say the least, but, if you have an Apple Watch, you're in luck.

When you're playing music on a Watch running on watchOS 4 or later, whether it's from your iPhone or Watch, you can glance at your watch to see what's "Now Playing."

All you have to do is rotate the Digital Crown to raise and lower the volume. It couldn't be more convenient.

Enable Fall Detection

Apple made a big deal about Fall Detection during the unveiling of the Apple Watch Series 4, but the feature actually isn't turned on by default. When it is, the Watch is able to detect falls and offer automatic assistance.

However, unless you're above 65 years old, or you haven't specified your age inside the Health app, taking a hard fall won't activate the new feature. To enable it no matter your age, head to the Apple Watch app on your iPhone, tap the My Watch tab, go through to Emergency SOS and toggle the Fall Detection option.

Apple itself indicates that physically active people are more likely to trigger false positives, but only you can decide whether the potentially incessant notifications are worth it.

Check your data usage

If you've got an Apple Watch with a cellular connection, you may want to keep an eye on your data usage. You never know whether something will tip you over your monthly plan.

Alternatively, it's neat to see how little data the Apple Watch actually uses.

You'll have to head over to the companion app, checking in on the cellular menu option to see the information. Once you do, however, you'll find out how much data you've used in the current period and which apps are using that data.

Check in on storage

There's a decent amount of room on the Apple Watch to accommodate apps, emails and music.

If you want to see how much storage you have to play with, head to the Apple Watch companion app, go to General and then select Usage. Here, you'll be able to get a breakdown of how much space apps are taking up.

Change text size

If you find yourself constantly squinting at your wrist to read the Watch's notifications, you can change the text size. Simply go to Settings > Brightness & Text Size then configure it to whatever's comfortable for you.

Eject water after a swim

From Series 2 onward, the Apple Watch is waterproof and includes an eject mode to get rid of any water that's left lurking inside after you've gone swimming.

If you want to manually use this feature, swipe up from the main home screen to view the Apple Watch Control Center. Look for the water droplet icon and press it. You'll then be prompted to twist the digital crown to eject the water.

It's actually a good idea to tap the droplet button before getting in the shower or pool (but don't worry if you forget) as it also locks the screen, preventing it from confusing water droplets for your fingers.

Find your iPhone

Lose your iPhone? Good thing you have your Apple Watch on because it can help you find your handset in a pinch.

Swipe up to bring up the Control Center, look for the 'Ping iPhone' button and tap to be reunited with your iPhone.

If you tap and hold the 'Ping iPhone' button, your iPhone's LED flash will blink, giving you a visual guide in case the speaker gets muffled.

Reply from the wrist

Unless you have the latest Apple Watch Series 7, you don't have access to a keyboard on Apple's smartwatch.

If you don't like the idea of typing out replies, there are other ways you can respond to texts.

Apart from using custom responses, you can either tap the microphone to dictate replies with your voice, or scribble them letter by letter.

That's a little tasking, but Siri is getting better at voice detection, and when you're paired with some Bluetooth headphones with a mic, the experience is much smoother.

Force restart

Apple says to do this action as a last resort, so if you're left with no choice then hold the Digital Crown and side button together for 10 seconds. Just like restarting your iPhone, the Apple logo will pop up and your watch should restart.

Cover to dim

If your Watch is set to notify you or ring with sounds, but you're in the middle of a meeting or situation where loud dings are rude, you can turn on 'Cover to Mute' in the Sound & Haptics settings.

Then simply cover your watch for three seconds for it take effect.

Use third-party complications

Added to the mix back in watchOS 2 (but we'll forgive you if you're new to this), information can be drawn from third-party apps into watch faces.

On the Series 4 or later, the main faces for these are Infograph and Infograph Modular – where you'll get spots for eight and six complications respectively. On other Series, you'll have the Modular, Utility and Chronograph options.

Press and hold the watch face to cycle through the selection of faces, and tap Customize to enter an editing mode. Swipe to the right to make the areas that can be customised appear in boxes.

Tap the area you want to change, and then use the crown to scroll through options – this is where those third-party complications can be added. Most can be turned off if you prefer the minimalist look.

If you don't want to deal with the Watch's tiny display, you can also do this on your iPhone via the Face Gallery in the companion app.

Use Theater Mode

Have you ever sat in a dark cinema, moved your arm to get a little more comfortable and then seen a beacon go off on your wrist? That was your Apple Watch.

To avoid being a public nuisance in the cinema, just swipe up on the watch face and click the Greek theatre faces to enable Theater Mode, which will keep your Watch's display off during your film.

Do some gym-based cardio

Apple GymKit has been around for a while now, and while it'll take a while for gyms across the world to get in the necessary equipment, the process has begun.

Essentially, GymKit allows you to tap your Apple Watch to an NFC terminal on cardio equipment, which will then perfectly sync up all your exercise data.

Transfer a call to your iPhone

Received a call on your Watch, but want to continue it on your actual phone? No problem. Accept the call from the smartwatch and swipe up to send it over. Seamless.

Get your podcast on

The Podcast app was one of our most requested features, and we finally got it with watchOS 5 in 2018.

With the update, you'll be able to listen to your favorite shows on the go, with them syncing up with your iPhone and Mac. Handily, that means you can pause halfway through an episode on one device and pick up on another.

Master the Workout app

Apple's Workout app got a big upgrade in watchOS 5. Along with including a whole bunch of new workouts, like High Intensity Interval Training, skiing and snowboarding, it also added automatic exercise detection.

However, this doesn't work quite how you would expect. The Apple Watch will sense what kind of workout you're doing, but it won't automatically start tracking it without you doing anything.

Read this: Apple Watch Activity and Workout app explained

Instead, it sends you a notification telling you that it thinks you're working out, and it'll remind you to start the tracking. Once you've done so, it'll give you retroactive credit for the amount of workout you've already done. Similarly, if you forget to end a workout it'll prompt you to do so.

As for new workouts, yoga and hiking are finally in the list. Yoga's algorithm is built off your heart rate, while hiking takes pace, heart rate, and elevation gain into consideration.

Put the watch in power reserve mode

Draining power too fast? Swipe up on the main watch screen to bring up the Control Center. The first icon displays current battery status. Press this to reveal the Power Reserve button.

And if you're finding this to be a consistent problem, it's worth finding out how to get more out of your device throughout the day. Read our 15 tips to improving Apple Watch battery life.

Trim notifications

By default, the Apple Watch will show any notification that appears on your iPhone, but you can turn each one off individually to quell the digital noise.

In the iPhone's Apple Watch app menu tap Notifications and scroll down to 'mirror iPhone alerts from' and start turning off those annoying offenders.

Set up for left handers

The Digital Crown isn't best placed for south paws, who generally wear their watch on the right arm. However, you can have the Apple Watch flip its controls so that the crown works on the bottom left instead of top right.

In the iPhone companion app go to General > Watch Orientation and then choose your preferred wrist and Digital Crown position.

Reorganize your apps

Thankfully, there are a couple of different ways to organize your apps.

You can keep the old honeycomb grid (shown above) if you want, and if you do choose that way, know that it's much easier to fire up the companion app, head over to App Layout and organise it all there, instead of on the watch itself.

If you want to be done with the honeycomb grid, you can also switch over to a list view. On the Watch, just force touch on the app selection screen to choose the grid view option.

Make Mickey and Minnie speak

Say you're a bit sad, and you need a jolt of joy, you can head over to your Mickey or Minnie watch face and tap on them to hear them tell you the time in their trademark voices.

You'll need to make sure it's on by heading to Sounds & Haptics in the companion and enabling 'Tap to Speak'.

Trim watch faces

While Mickey has been the face of Apple's marketing campaign, and he's a fun novelty, it's virtually impossible to tell the time from his stubby arms.

In fact, there are only three watch faces we actually can bear to use. Banish the rest by swiping up on any offending design. If you want one back, just press the + at the end of the list.

Delete stock Apple apps

Unless you're really invested in the stock market, you probably haven't touched Apple's Stocks app on the iPhone. So why would you open it up on your Apple Watch?

Back in iOS 10, Apple added the ability to remove stock apps from your iPhone. Lucky for you, deleting those apps also removes them from your Apple Watch.

Set up Apple Pay Cash

A headline addition that landed through watchOS 4.2, Apple Pay Cash is essentially a prepaid debit card that'll let you pay for things in stores as well as pay friends.

So if you owe your friends for that lunch, or you just lost a bet, you can simply open the messages app on your Watch and pay them. You can also request money from friends if they're avoiding you.

Setting up Apple Pay Cash is simple. If you've got a debit card linked to your Apple Pay account, all you have to do is head to Settings on your phone, then 'Wallet & Apple Pay' then 'Apple Pay Cash'. You simply agree to the terms and – voila – you're all set up.

Turn off the always-on display

The new Always On mode is useful for getting a sneak peek at the time and, well, making the Apple Watch feel more like a real watch, but there are occasions when you'll want to switch it off. Here's how to do so:

1. Open the 'Settings' app on the Apple Watch.

2. Tap 'Display & Brightness'.

3. Tap 'Always On', then tap the 'Always On' switch from green to white.

Send your location from messages

Always late on your way to meet friends? Instead of wasting time replying to them from your phone, simply send your live location from your wrist and let them watch the drama unfold for themselves.

From a Messages conversation, Force Touch the display and tap 'Send Location'.

Flag an email for later

Even if you choose to have email notifications on your wrist, it's likely you won't actually engage with them properly – and you can't compose replies. So, why not save the important ones for later?

To do so, use Force Touch on a message and tap Flag.

Choose mailboxes for notifications

Though you may want emails sent to your wrist, they might only be from a certain mailbox.

If you only want personal ones, and don't want to be bombarded by work-related ones, head to the iPhone's Watch app. From here, go to My Watch > Mail > Include Mail and select the mailboxes you want.

Understand Apple Watch turn-by-turn directions

If you're navigating a city using Apple Watch turn-by-turn walking directions then you don't even need to look at your smartwatch.

The Taptic Engine will direct you, albeit in a slightly bonkers way.

A left turn will be indicated by three sets of double 'taps'.

And a right one will be indicated by 12 taps. Yes, 12.

The first time we used the turn-by-turn we were confused by the sheer amount of tapping, so hopefully that adds some clarity.

How to Manually Add Exercise to Apple Watch

Source: https://www.wareable.com/apple/apple-watch-tips-and-tricks-iwatch-7383

Share this post